We EPG has set up a full set of quality management technique which is provided with superior inspection and check tools. – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with 5 different branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
Bearings Distributor SKF/NSK/NTN/Timken/Koyo/THK Quality Roller Bearing HK505825 Needle Roller/Rolling Bearing
Reasons to pick Guomai Bearings as your top quality needle roller/rolling bearings partner
one. Bearing designing: Guomai has our own bearing R&D staff and adopts Germany engineering. This allows us to provide OEM and ODM service to you.
two. Creation process:We strictly comply with the 5S creation procedure and obtained ISO9001:2008 quality management method certification. Aside from, we released from abroad ept famous brand names lathes and heat remedy tools, this enables us to offer higher precision bearings with similar top quality to ept renowned manufacturers such as SKF, ,TIMKEN,NSK,NTN,KOYO,NACHI and so on.
3. Supplies: To make certain the large high quality of bearings, we use substantial carbon chrome bearing metal which provides high rigidity, and higher resistance to abrasive wear to make the bearings. Low carbon chilly rolled metal and reduced carbon stainless metal is also employed in accordance to customers’ requirements.
four. High quality inspection: All bearings will be strictly examined ahead of packing. We have Taylor talysurf, hardness meter,clearance detector,vibration(speed) measuring instrument,roundness instrument to promise all bearings are qualified with the specifications.
5. Lubricants: Suited lubricants are utilized to protect the bearings from oxidation or corrosion of components therefore allow our bearings with for a longer time life time, low noise and better high temperature efficiency. Selection of lubricants is normally governed by the bearing application. Proper decision of large high quality lubricants could prevent steel to metallic get in touch with and conduct warmth absent from the bearings.
six. Packing: Guomai bearings pay attention to every single depth in the bearing manufacturing process. We adopt plastic bag, Kraft paper, thick paper box and cartons to safeguard the bearings from unexpectable hurt in the course of the transportation and warehouse inventory.
7. Manufacturing facility direct advertising: We are the factory and not the distributor or ept agent, so we could give the same good quality with competitive cost.
What is Needle Roller Bearing?
A needle roller bearing is a specific type of roller bearing which makes use of lengthy, slender cylindrical rollers bathroom ept like stitching needles. Rollers of normal roller bearings are only slightly for a longer time than their diameter, but needle rollers are at minimum 4 occasions more time than their diameter. Like all the other bearings, they are employed to reduce the friction of rotating floor.
Compared to ball bearings and other typical roller bearings, needle bearings have a more substantial floor area in get in touch with with the raceways, so they can help a higher radial load but not axial load. They are also thinner, so they demand much less clearance between the axle and the encompassing construction.
Needle bearings are widely used in ept parts such as rocker arm pivots, pumps, compressors, and transmissions. The drive shaft of a rear-wheel push automobile usually has at minimum eight needle bearings (4 in every U joint) and often more if it is especially extended, or operates on steep slopes.
Assorted kinds of needle bearings are accessible in a wide range of sizes and tolerances, for a multitude of applications this kind of as gearboxes, automotive electricity transmission methods, two and four stroke engines, planetary gear sets and air compressors.
Needle roller and cage assemblies are offered in solitary or double row, solid or split cage, metric and inch dimensions. Solitary and double row bearings are obtainable with or without ribs, and with or with no inner rings.
Element of Needle roller/rolling bearings specs
Shaft Diameter | Bearing Designation and Mass Approx | Boudary Dimensions | Standard Load Rating | Limiting Velocity | ||||||||
Open | Shut | FW | D | C | Cr Dynamic | Cor Static | Oil | |||||
mm | Existing | Unique | Mass(g) | Recent | Unique | Mass(g) | mm | N | rpm | |||
4 | HK0408TN | 37941/four | 1.six | BK0408TN | 35941/4 | one.eight | 4 | eight | 8 | 1540 | 1070 | 40000 |
five | HK0509 | 47941/5 | two | BK0509 | 45941/five | 2.1 | 5 | nine | 9 | 2200 | 1790 | 36000 |
6 | HK0607 | 27941/six | 1.8 | – | – | – | six | ten | seven | 1600 | 1400 | 30000 |
HK0608 | 37941/6 | 2.one | BK0608 | 35941/6 | two.2 | 6 | ten | 8 | 1830 | 1550 | 32000 | |
HK0609 | 47941/6 | 2.2 | BK0609 | 45941/6 | two.six | 6 | 10 | 98 | 2650 | 2400 | 30000 | |
HK06×12×08 | two.5 | – | – | – | six | twelve | eight | 2230 | 2571 | 33000 | ||
seven | HK0709 | 47941/seven | 2.three | BK0709 | 45941/7 | 2.9 | seven | eleven | nine | 2800 | 2150 | 27000 |
8 | HK0808 | 37941/8 | 2.7 | BK0808 | 35941/8 | three | eight | 12 | eight | 2550 | 2400 | 21000 |
HK571 | 57941/8 | 3 | BK571 | 55941/8 | 3.four | 8 | 12 | 10 | 3700 | 3450 | 21000 | |
HK08×14×10 | 27942/eight | 5.35 | BK08×14×10 | 25941/8 | 5.8 | eight | 14 | ten | 3800 | 3950 | 25000 | |
HK08×14×12 | 37942/8 | six.6 | – | – | – | eight | fourteen | 12 | 4100 | 4320 | 25000 | |
9 | HK0908 | 37941/9 | three | BK0908 | 35941/nine | 3.4 | 9 | 13 | eight | 3650 | 4050 | 25000 |
HK571 | 57941/9 | 4 | BK571 | 55941/nine | four.3 | nine | thirteen | 10 | 4050 | 4250 | 25000 | |
HK571 | 67941/9 | four.six | BK571 | 65941/nine | four.nine | 9 | 13 | 12 | 5000 | 6000 | 25000 | |
HK09×15×10 | 27942/nine | 5.six | – | – | – | nine | fifteen | ten | 5300 | 6300 | 25000 | |
10 | HK1571 | 57941/ten | four.one | BK1571 | 55941/10 | 4.3 | 10 | 14 | 10 | 3900 | 4800 | 19000 |
HK1012 | 67941/ten | four.8 | BK1012 | 65941/10 | 5 | ten | fourteen | twelve | 5000 | 6300 | 19000 | |
HK1015 | – | 6 | BK1015 | – | 6.2 | 10 | 14 | fifteen | 6700 | 7800 | 19000 | |
12 | HK1208 | 37941/12 | three.3 | – | – | – | 12 | sixteen | 8 | 7200 | 8000 | 19000 |
HK1210 | 57941/twelve | four.six | BK1210 | 55941/twelve | five.two | twelve | 16 | ten | 4150 | 5800 | 19000 | |
HK1212 | 67941/twelve | five.6 | BK1212 | 65941/twelve | six.2 | 12 | sixteen | 12 | 3800 | 5100 | 15000 | |
13 | HK1312 | – | 8.9 | BK1312 | – | 11.two | 13 | 19 | 12 | 6200 | 7100 | 17000 |
14 | HK1410 | 27941/fourteen | 8.three | BK1412 | 35941/14 | twelve.1 | fourteen | twenty | 10 | 6700 | 7000 | 16000 |
HK1412 | 37941/fourteen | 10.5 | – | – | twelve.2 | 14 | twenty | 12 | 6800 | 7500 | 16000 | |
HK1416 | 57941/14 | 13.nine | – | – | 12.five | fourteen | twenty | 16 | 7300 | 9000 | 14000 | |
15 | HK15×20×12 | 7941/15 | 8.four | – | – | – | 15 | 20 | twelve | 5800 | 6000 | 14000 |
HK15×20×16 | 7942/15 | eleven.four | – | – | – | fifteen | 20 | sixteen | 6000 | 6200 | 14000 | |
HK15×20×20 | 7943/15 | 13.eight | – | – | – | 15 | twenty | 20 | 6100 | 6400 | 14000 | |
HK1512 | 37941/fifteen | eleven.one | BK1512 | 35941/fifteen | 12.7 | 15 | 21 | 12 | 7000 | 8400 | 14000 | |
HK1514 | 47941/15 | twelve.seven | – | – | twelve.9 | fifteen | 21 | 14 | 8500 | 10400 | 13000 | |
HK1515 | – | fourteen.two | – | – | thirteen | fifteen | 21 | 15 | 9100 | 11400 | 13000 | |
HK1516 | 57941/15 | 15 | BK1516 | 55941/15 | sixteen.5 | fifteen | 21 | sixteen | 9800 | 11400 | 14000 | |
HK1522 | SZ-439 | 20.four | BK1522 | – | 22 | 15 | 21 | 22 | 10400 | 16500 | 14000 | |
HK15×22×12 | 7948/15 | twelve.five | – | – | – | fifteen | 22 | 12 | 14300 | 18400 | 13000 | |
16 | HK16×21×09 | – | seven.5 | – | – | – | sixteen | 21 | nine | 4400 | 5600 | 12000 |
HK1612 | 37941/sixteen | eleven.7 | BK1612 | 35941/sixteen | 13.eight | 16 | 22 | twelve | 7100 | 9200 | 14000 | |
HK1614 | 47941/sixteen | fourteen.4 | – | – | – | sixteen | 22 | 14 | 8800 | 9900 | 12000 | |
HK1616 | 57941/sixteen | fifteen.eight | BK1616 | 55941/16 | 17.six | 16 | 22 | 16 | 15710 | 14300 | 14000 | |
HK1617 | SZ-435 | 18 | – | – | – | 16 | 22 | seventeen | 12900 | 17200 | 12000 | |
HK1622 | 87941/16 | 21.7 | BK1622 | 85941/16 | 23.4 | sixteen | 22 | 22 | 11100 | 17400 | 14000 | |
17 | HK1712 | 37941/seventeen | twelve.two | BK1712 | 35941/seventeen | fourteen.5 | 17 | 23 | twelve | 6900 | 9300 | 13000 |
HK1714 | 7941/17 | fourteen | – | – | – | 17 | 23 | fourteen | 6800 | 15710 | ten thousand | |
HK1716 | 57941/17 | fifteen.nine | – | – | – | seventeen | 23 | 16 | 8500 | 12500 | ten thousand | |
HK1718 | 7942/seventeen | 19 | – | – | – | seventeen | 23 | 18 | 9500 | 10600 | ten thousand | |
18 | HK1812 | 37941/18 | thirteen.1 | BK1812 | 35941/18 | 14.nine | 18 | 24 | twelve | 7100 | 9900 | 12000 |
HK1816 | 57941/18 | seventeen.5 | BK1816 | 55941/18 | 19.9 | 18 | 24 | 16 | 10600 | 15300 | 12000 | |
19 | HK19×27×16 | TA1916 | 23 | – | – | – | 19 | 27 | sixteen | 8100 | 9500 | 10500 |
————————————–HK505825 Information————————————–
———————————-Guomai Bearing Factory——————————-
ZheJiang Guomai Bearing Co.,Ltd(hereinafter referred to as Guomai) was proven in 1999, with much more than twenty many years of bearing study and producing encounter. The manufacturing facility covers an spot of 16000 square meters,7000 of which is manufacturing location and the other is business office and warehouse. Guomai has big inventory for normally employed bearing designs and this enables us to produce the bearing to consumers inside the shortest time.
There are complete a hundred and sixty staffs, 6 automatic bearing assembly lines,116 CNC machines and 22 sets of exact inspection instruments. We not only have our possess R&D staff but also cooperate with ZheJiang University of Science and Technology, HangZhou Bearing Study Institute to develop new bearing designing and producing technologies.
In addition to traditional bearings, Guomai also provides OEM and ODM services to our respectable clients to meet up with their specific demands.We launched advanced milling, turning devices, heat remedy products and bearing screening devices to assure the top quality of the bearings because we know “Quality is the life of Guomai” .Now our top products incorporate taper roller bearing, angular contact ball bearing, deep groove bearing ,spherical bearing and cylindrical roller bearing with P5, P4 accuracy quality.
After so many several years of establishing, Guomai has built up an exceptional revenue network in China. Our two bearing manufacturers “CVZ” and “Bentu” are ept acknowledged and have high track record inside the industrial equipment and parts subject. In addition, with self confidence of our bearing quality, we began to export our bearings 4 years back. Customers from Europe, North The usa, Middle East, Southeast Asia and Africa have appreciated the happiness our bearings introduced to them.
Guomai Bearing usually upholds “Earn-Acquire” spirit and thinks in “Information figure out accomplishment” philosophy, and maintain enhancing bearing quality in the earlier 20 years. Some series of our bearings have equivalent quality with SKF, NSK, Timken, NACHI, KOYO, NTN and other ept famous makes but with decrease cost.
Bathroom ept to the future, Guomai will insist on the ept innovation and processing levels to provide the most acceptable bearing products and provider to our buyers.
Bearing internet page description and versions may possibly be restricted, you should contact us for more details.
———-Workshop See——-
———-Exhibition——-
Guomai Bearings, turn with the ept and you!!!
The use of authentic products manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our organization and the detailed alternative elements contained herein are not sponsored, accepted, or made by the OEM.