Productomschrijving
Productomschrijving
Optimized moment of inertia 0.4-2KW Motor Speed Reducer gear reduction box servo planetary gearbox
HangZhou Fubao Electromechanical Technology Co., Ltd. Motor Speed Reducer gear reduction box servo planetary gearbox is a new generation of practical products independently developed by our company:
Low noise: less than 65db.
Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.
High torque: higher than the standard planetary reducer torque.
High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.
High deceleration ratio: Modular design, planetary gearbox can be interlinked.
Motor Speed Reducer gear reduction box servo planetary gearbox characteristic:
1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the Motor Speed Reducer gear reduction box servo planetary gearbox. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.
2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.
3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.
4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
Compared with other reduction machines, Motor Speed Reducer gear reduction box servo planetary gearbox machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.
Because of these characteristics,Motor Speed Reducer gear reduction box servo planetary gearbox is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.
Productparameters
| WGK series parameters | Model number | WGK060 | WGK085 | WGK115 | WGK160 |
| Rated output torque | 12~40Nm | 40~135Nm | 90~335Nm | 270~900Nm | |
| Reduction ratio | L1:3,4,5,7,8,10 L2:12,16,20,25,28,32,35,40,56,64,70 L3:80,100,125,140,160,175,200,250,280,320,350,500,512,700,1000 | ||||
| Planetary gear backlash | L1:8arc.min L2:10arc.min L3:12arc.min | ||||
Product Details
Other products
Bedrijfsprofiel
HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.
The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CHINAMFG pursuit to make far-reaching contributions.
Factory Display
Veelgestelde vragen
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.
| Sollicitatie: | Motor, Machinery, Agricultural Machinery, Packaging Machinery |
|---|---|
| Hardheid: | Verhard tandoppervlak |
| Installatie: | Horizontaal type |
| Aanpassing: | Beschikbaar | Aangepast verzoek |
|---|
.shipping-cost-tm .tm-status-off{achtergrond: geen;padding: 0;kleur: #1470cc}
| Verzendkosten: Geschatte vracht per eenheid. | over verzendkosten en geschatte levertijd. |
|---|
| Betaalmethode: |
|
|---|---|
| Aanbetaling Volledige betaling |
| Munteenheid: | US$ |
|---|
| Retourneren en terugbetalen: | U kunt tot 30 dagen na ontvangst van de producten een restitutie aanvragen. |
|---|
Challenges in Using Miter Gearboxes
While miter gearboxes offer various advantages, they also come with certain challenges that need to be addressed:
Smering: Proper lubrication is crucial for miter gearboxes to minimize friction, heat, and wear between gear teeth. Ensuring consistent and sufficient lubrication in the gearbox can be challenging, especially in enclosed or hard-to-reach spaces.
Maintenance: Miter gearboxes require periodic maintenance to ensure their optimal performance and longevity. Maintenance tasks may include checking and replenishing lubrication, inspecting gear teeth for wear, and addressing any misalignment or mounting issues that may arise over time.
Backlash: Backlash, or the clearance between gear teeth, can impact the accuracy of motion transfer. Excessive backlash can lead to reduced precision and positioning errors in applications that require high accuracy.
Complex Design: Miter gearboxes have a more intricate design compared to some other gearbox types, which can make manufacturing, assembly, and maintenance more complex. This complexity may also result in higher manufacturing and maintenance costs.
Efficiency Loss: Miter gearboxes can experience efficiency losses due to factors such as friction and misalignment. These losses can reduce the overall efficiency of power transmission, leading to energy wastage.
Space Constraints: In some applications, space limitations can pose a challenge when integrating miter gearboxes, especially when larger gear ratios are required to achieve the desired motion direction change.
Shock Loads: Applications subject to sudden shock loads or high impact forces can pose challenges for miter gearboxes. Adequate measures, such as using shock-absorbing components or designing for higher durability, may be required to address these challenges.
Alignment and Mounting: Proper alignment and mounting of miter gearboxes are critical to ensure smooth operation and prevent premature wear. Achieving precise alignment can be challenging, especially in installations with limited access or complex geometries.
Cost Considerations: The design complexity and manufacturing requirements of miter gearboxes can contribute to higher costs compared to simpler gearbox types. Balancing the benefits of miter gearboxes with the associated costs is essential during the selection process.
Addressing these challenges often requires careful engineering, proper maintenance practices, and consideration of specific application requirements. Despite the challenges, miter gearboxes remain valuable components in various industries where their unique motion direction-changing capabilities are advantageous.
Voordelen van verstekversnellingsbakken ten opzichte van andere tandwielsystemen
Verstektandwielkasten bieden in bepaalde scenario's duidelijke voordelen, waardoor ze de voorkeur krijgen boven andere typen tandwielsystemen:
Bewegingsverandering van 90 graden: Verstektandwielkasten blinken uit in het veranderen van de bewegingsrichting met 90 graden. Dit maakt ze ideaal voor toepassingen waarbij een haakse bewegingsverandering vereist is.
Compact ontwerp: Verstekkasten hebben een compact en ruimtebesparend ontwerp en zijn daardoor geschikt voor toepassingen met beperkte ruimte.
Precisiebesturing: In stuursystemen voor auto's zorgen verstekbakken voor een precieze en nauwkeurige controle over de rijrichting van voertuigen, wat bijdraagt aan een veilige en responsieve besturing.
Minder speling: Verstektandwielkasten zijn ontworpen om speling te minimaliseren en zo een nauwkeurige en soepele bewegingsoverdracht te garanderen. Dit maakt ze geschikt voor toepassingen waar precisie en reactievermogen cruciaal zijn.
Aanpassing: Verstekversnellingsbakken kunnen worden aangepast aan specifieke koppel-, snelheids- en ontwerpvereisten, waardoor ze geschikt zijn voor verschillende toepassingen.
Betrouwbare bewegingsoverdracht: Verstekbakken zorgen voor een betrouwbare bewegingsoverdracht en worden vaak gekozen voor toepassingen waarbij een consistente en nauwkeurige bewegingsregeling essentieel is.
Laag geluids- en trillingsniveau: Het ontwerp van verstekbaktransmissies kan helpen bij het verminderen van geluid en trillingen, waardoor ze geschikt zijn voor toepassingen waarbij een stille werking vereist is.
Verstektandwielkasten worden verkozen in situaties waarin het unieke ontwerp en de mogelijkheden aansluiten bij specifieke vereisten voor bewegingsregeling en richtingverandering, en waarbij ze efficiëntie, precisie en betrouwbaarheid bieden.
Betekenis van de hoek tussen kegelwielen in een verstekbak
De hoek tussen de kegelwielen in een verstekbak is van cruciaal belang, omdat deze de richting van de bewegingsoverdracht en het type mechanische opstelling dat kan worden bereikt, bepaalt.
In een verstekbak is de hoek tussen de kegelwielen doorgaans 90 graden. Dit betekent dat de twee elkaar kruisende assen loodrecht op elkaar draaien, waardoor de beweging van de ene as naar de andere in een rechte hoek wordt overgebracht.
De hoek van 90 graden tussen kegelwielen is een fundamenteel kenmerk dat diverse toepassingen mogelijk maakt waarbij veranderingen in de bewegingsrichting vereist zijn binnen een compacte ruimte. Deze configuratie maakt het mogelijk om rotatie-energie en koppel om te leiden, wat het nuttig maakt in toepassingen zoals het veranderen van de richting van de krachtstroom, het omleiden van beweging en het overbrengen van kracht rond obstakels of hoeken.
Het is belangrijk om te weten dat de hoek tussen de kegelwielen kan worden aangepast aan verschillende waarden, maar 90 graden is de meest voorkomende configuratie in verstekbakken vanwege de veelzijdige en praktische eigenschappen. De precieze hoek en plaatsing van de kegelwielen zorgen voor een efficiënte bewegingsoverdracht en voldoen tegelijkertijd aan de specifieke eisen van het mechanische systeem waarin de verstekbak wordt gebruikt.
editor by CX 2023-10-16