Penerangan Produk
Basic Info.
| Model | 1204 Wheel Tractor | |
| Drive Type | 4WD/2WD | |
| Overall MachineDimensions(length*width*height and location) | mm | 4200*1760*2700 |
| Wheelbase | mm | 2100 |
| commonly used wheel tracks | mm | 1400 |
| wheel distance(front wheel/rear wheel) | mm | 1300-1600(adjustable) |
| Minimum ground clearance and location | mm | 460(bottom of front axle) |
| rear axle | / | TB aggravation large bridge(12+12) |
| standard weight(front/rear) | kg | 144/400 |
| number of gears(forward/reverse) | / | 12+12 shuttle side gear |
| Maximum design theoretical speed | km/h | 48 |
| Engine and main clutch connection method | / | direct |
| type of rollover protection device(cab or safety frame) | / | security framework |
| Engine structure type | / | In-line,direct injection,water-cooled,four-stroke |
| engine manufacturer | / | HangZhou 120 Hp |
| engine air intake method | / | turbocharging |
| number of engine cylinders | / | 4 |
| engine standard power | kw | 88.2 |
| engine standard speed | r/min | 2400 |
| engine cooling method | / | water cooling |
| steering system type | / | fully hydraulic |
| steering system steering control mechanism | / | steering wheel |
| steering system steering mechanism type | / | front wheel steering |
| tyre model | front wheel:9.5-24 rear wheel:14.9-30 | |
| Suspension device type | / | Rear three-point suspension |
| number of hydraulic output groups | / | three |
| working device safety valve full opening pressure | MPa | 17.5-18.0 |
| number of splinesof PTO shaft | / | 6 |
| PTO shaft standard speed | R/min | 540/760 |
Parameter Produk
1204 TRACTOR
Tractor A self-propelled engine used to pull and drive work machinery to complete various mobile operations. Can also do fixed work power. It is composed of engine, transmission, walking, steering, hydraulic suspension, power output, electrical instruments, driving control and traction systems or devices.
The engine power is transmitted from the transmission system to the driving wheel to make the tractor run. In real life, it is common to use the rubber belt as the medium of power transmission. Agricultural, industrial and special purpose tractors according to function and use; According to the structure type of wheel, crawler, boat tractor and self-propelled chassis.
Features
1.It is equipped with famous and excellent engines, with large torque reserve, strong power and low fuel consumption.
2.Full hydraulic steering system, flexible and light to operate.
3.Middle shift gear, easy to operate.
4.8+2 gear shift, reasonable speed matching, high working efficiency and strong adaptability.
5.The new miniature LCD instrument is developed according to the harsh working conditions of construction machinery and has high reliability.
REAL SCENE SHOOTING
Although the tractor is a more complex machine, its type and size are different, but they are composed of 3 parts of the engine, chassis and electrical equipment, each of which is indispensable.
Tractor engine
It is the device that generates the power of the tractor, and its role is to convert the heat energy of the fuel into mechanical energy to output power. Most of the farm tractors produced use diesel engines.
Tractor chassis
It is the device that transmits power to the tractor. Its role is to transfer the power of the engine to the driving wheel and the working device to make the tractor travel, and to complete the mobile operation or fixed role. This function is achieved through the mutual cooperation and coordination of the transmission system, walking system, steering system, braking system and working device, and at the same time, they constitute the skeleton and body of the tractor. Therefore, we refer to the above 4 systems and 1 device as chassis. That is to say, in the whole of the tractor, all other systems and devices other than the engine and electrical equipment are collectively referred to as the tractor chassis.
Tractor electrical equipment
It is a device to ensure that the tractor uses electricity. Its role is to solve lighting, safety signals and engine starting.
Profil Syarikat
HangZhou Qingcha Machinery Manufacturing Co., Ltd. is located in the ash high-tech park of Xihu (West Lake) Dis. Town, HangZhou City,HangZhou. It has been committed to the research and development and production of internal combustion counterbalanced forklifts, battery counterbalanced forklifts, OMV intelligent omnidirectional forklifts,wheel loader,mini dumper,mixer,backhoe loader,excavator ,tractor and mini digger.
Since its inception, the company has always been to build China’s most cost-effective high-quality construction machinery for the purpose of continuous research and development and innovation, the company has large CNC cutting machine, vertical machining center, horizontal gantry milling machine and other equipment more than 40 sets, to achieve all the key components Self-made, providing a strong guarantee for the quality of the product.
For the long-term development of the company, the company regards the quality as the life of the company, establishes a perfect quality assurance system, and has passed the IS09001 international quality system certification.
In the near future, HangZhou Forklift will become 1 of the CHINAMFG R&D, production and export construction machinery bases in the industry, contributing to the prosperity of the domestic and international logistics market and the promotion of innovation and development in the construction machinery industry.
Soalan Lazim
1.What services would you offer if I buy from you?
Our trained Professional service team offers high-quality in-time service in a very friendly way. For a good customer.
2.Can you supply the machine with your customer requirement?
We have strong technology team, are able to do adjustment design for customers according to users’ most requirements.
3.Are you the factory?
Yes, the factory Founded in 2015 year.
Location at: Intersection of Huibu Xihu (West Lake) Dis. Avenue and CHINAMFG Avenue in Xihu (West Lake) Dis. Town, HangZhou City, HangZhou.
| Jenis: | Wheel Tractor |
|---|---|
| penggunaan: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE |
.kos penghantaran-tm .status-dimatikan{latar belakang: tiada;padding:0;warna: #1470cc}
| Kos penghantaran: Anggaran muatan seunit. | tentang kos penghantaran dan anggaran masa penghantaran. |
|---|
| Kaedah Pembayaran: |
|
|---|---|
| Bayaran Permulaan Bayaran Penuh |
| mata wang: | US$ |
|---|
| Pemulangan&pemulangan: | Anda boleh memohon bayaran balik sehingga 30 hari selepas produk diterima. |
|---|
Pemasangan dan Penjajaran Kotak Gear Miter yang Betul
Memasang dan menjajarkan kotak gear mitra dengan betul adalah penting untuk memastikan prestasi optimum dan jangka hayatnya. Ikuti langkah ini untuk mencapai pemasangan dan penjajaran yang betul:
- Penyediaan: Kumpulkan semua alatan dan peralatan yang diperlukan untuk pemasangan, termasuk perkakasan pelekap, shim dan alatan penjajaran.
- Permukaan Pemasangan: Pastikan permukaan pelekap bersih, rata dan bebas daripada sebarang serpihan atau bahan cemar yang boleh menjejaskan penjajaran dan operasi kotak gear.
- Alat Penjajaran: Gunakan alat penjajaran ketepatan, seperti penunjuk dail atau sistem penjajaran laser, untuk mengukur dan melaraskan penjajaran kotak gear dengan tepat dan aci input dan outputnya.
- Semak Paralelisme: Jajarkan aci input dan output kotak gear supaya selari antara satu sama lain dan berserenjang dengan permukaan pelekap. Langkah ini adalah penting untuk mengelakkan kehausan akibat salah jajaran dan mengurangkan tindak balas.
- Pelarasan: Gunakan shim atau komponen boleh laras lain untuk memperhalusi penjajaran. Buat pelarasan tambahan sambil terus menyemak penjajaran dengan alat penjajaran yang dipilih.
- Beban galas: Pastikan galas yang menyokong aci kotak gear dilincirkan dengan betul dan pramuat mengikut saranan pengilang. Pramuat galas yang betul membantu mengekalkan penjajaran dan mengurangkan kehausan.
- Mengetatkan Bolt: Ketatkan bolt pelekap secara beransur-ansur dan sama rata untuk mengelak daripada memperkenalkan penjajaran tambahan semasa proses pemasangan.
- Habis dan Pembersihan: Periksa sebarang masalah kehabisan atau kelegaan semasa putaran dengan memusingkan aci input. Jika terdapat sebarang ikatan, gangguan atau bunyi yang tidak normal, siasat dan atasi punca sebelum memuktamadkan pemasangan.
- Pemeriksaan Akhir: Periksa semula penjajaran menggunakan alat penjajaran dan pastikan kotak gear beroperasi dengan lancar tanpa sebarang getaran, bunyi atau rintangan yang luar biasa.
- Dokumentasi: Simpan rekod ukuran penjajaran dan pelarasan yang dibuat semasa proses pemasangan. Dokumentasi ini boleh menjadi berharga untuk rujukan dan penyelenggaraan masa hadapan.
Pemasangan dan penjajaran kotak gear mitra yang betul membantu mengoptimumkan prestasinya, meminimumkan haus dan lusuh, dan menyumbang kepada kecekapan dan kebolehpercayaan keseluruhan sistem mekanikal di mana ia digunakan.
Perbezaan Antara Kotak Gear Miter dan Lain-lain Jenis Kotak Gear
Kotak gear mitra mempunyai ciri tersendiri yang membezakannya daripada kotak gear jenis lain, seperti kotak gear heliks, taji dan planet. Perbezaan ini menyumbang kepada keupayaan unik dan kesesuaian mereka untuk aplikasi tertentu:
- Susunan Gear: Kotak gear mitra menggunakan gear serong yang bersilang pada sudut 90 darjah. Sebaliknya, kotak gear heliks dan taji menggunakan susunan gear selari atau co-planar, dan kotak gear planet menampilkan berbilang gear yang disusun di sekeliling gear matahari tengah.
- Perubahan Arah Gerakan: Kotak gear mitra cemerlang dalam menukar arah gerakan putaran sebanyak 90 darjah. Kotak gear lain mungkin menukar arah gerakan dengan sudut yang berbeza atau mengekalkan arah yang sama.
- Kekompakan: Kotak gear miter terkenal dengan reka bentuk kompaknya, menjadikannya sesuai untuk aplikasi dengan ruang terhad. Kotak gear planet, walaupun padat, mempunyai struktur dalaman yang berbeza.
- Kawalan Tindak Balas: Kotak gear miter direka untuk meminimumkan tindak balas dan memastikan pemindahan gerakan yang tepat. Kotak gear heliks dan taji mungkin mempunyai lebih banyak tindak balas kerana susunan gearnya, manakala kotak gear planet boleh memberikan kawalan tindak balas yang baik.
- Tork dan Kelajuan: Kotak gear yang berbeza berbeza dalam keupayaan tork dan kelajuannya. Kotak gear miter sesuai untuk aplikasi tork dan kelajuan sederhana, manakala kotak gear planet menawarkan kepadatan tork yang tinggi.
- Aplikasi: Kotak gear miter biasanya digunakan untuk aplikasi yang memerlukan perubahan 90 darjah dalam arah gerakan, seperti sistem penghantar, mesin cetak dan beberapa jenis peralatan industri. Kotak gear heliks dan taji adalah lazim dalam pelbagai jentera dan peralatan. Kotak gear planet digunakan dalam robotik, aeroangkasa dan jentera berat.
Setiap jenis kotak gear mempunyai kelebihan tersendiri dan dipilih berdasarkan keperluan khusus aplikasi, termasuk kekangan ruang, ketepatan kawalan gerakan, tork, dan keperluan kelajuan.
Changing Direction of Rotational Motion with Miter Gearboxes
Miter gearboxes are specialized mechanical devices designed to efficiently change the direction of rotational motion by 90 degrees. They achieve this transformation through the use of bevel gears with intersecting shafts:
- Bevel Gears: Miter gearboxes utilize bevel gears, which have conical-shaped teeth. These gears are cut at an angle to the gear’s face and allow the transmission of motion between two intersecting shafts positioned at a 90-degree angle to each other.
- Intersecting Shafts: The input and output shafts of a miter gearbox are positioned in such a way that they intersect at a right angle. The bevel gears are mounted on these shafts, and when the input shaft rotates, it engages with the teeth of the bevel gear on the output shaft, transferring motion at a right angle.
- Directional Change: As the input shaft rotates, the bevel gear’s teeth mesh and transmit motion from the input shaft to the output shaft. This interaction causes a change in the direction of rotation, redirecting the output motion perpendicular to the input motion.
- Compact Design: Miter gearboxes are known for their compact and space-saving design. The intersecting shafts and bevel gears are housed within the gearbox casing, allowing for efficient motion redirection without the need for additional external components.
Overall, miter gearboxes play a crucial role in changing the direction of rotational motion, making them essential components in various mechanical systems where motion needs to be redirected efficiently and precisely.
editor by CX 2023-11-20